All
  • All
  • Product Center
  • News and Information
  • Frequently Asked Questions
Search

KY75D Co-Rotating Parallel Twin Screw Extruder Machine Group （L/D=52）

Learn More
KY75D Co-Rotating Parallel Twin Screw Extruder Machine Group （L/D=52）

Product Introduction

 

 

KY75D Co-Rotating Parallel Twin Screw Extruder Machine Group （L/D=52）

Materials to Be Produced: TPE

Capacity: more than 800~1000kg/Hr depends on the formulation and processing tech.

Voltage: 380v – Frequency: 50hz

 

 

  Configuration of Equipment

1. Feeding System:

1.1 Twin screw volumetric main feeder, Power of AC motor 3kw, with NIDEC frequency inverter

2. Main Extruder Model HKY75D (Twin Screw Extruder):

2.1 Main extruder is equipped with 1 set 250kw AC motor, max output rotating speed 600rpm, and NIDEC frequency inverter for the speed regulation system;

2.2 New generation twin screw speed reduction distribution gearbox 1 set;

2.3 One Nylon Pin Coupling connector, to transfer the main power to the gearbox;

2.4 One set of processing part: L/D ratio = 52:1, the barrels is bimetal integral alloy sleevet; screw element: W6Mo5Cr4V2, through vacuum quenching, hardness HRC60-62;

2.5 One set of barrels temperature control system: two cooling water pipes. Cooling water pipes and joint are all of stainless steel; cooling barrels by soft water circulation, incl. heat exchanger, 1.1KW water pump, stainless steel external water tank;

2.6 One set of vacuum system incl. external stainless steel vacuum condensation pot and water ring vacuum pump, 2.2kw.

3. One set of hydraulic screen exchanger, incl. hydraulic station.

4. One set of water ring pelletizing auxiliary equipment.

5. One set of electrical automatic control system, electrical instruments separates with the main extruder.

 

  Delivery

45 days after receiving the advanced payment. Delivery after acceptance inspection by the Buyer.

 

  Payment Terms

The contract becomes effective after 30% advance payment;

Balance be paid after equipment inspection and before shipment;

Technical Parameters

  HKY75D Co-Rotating Parallel Twin Screw Extruder


1. Main Motor：

1.1 Manufactured by China;

1.2 AC motor, power 250KW,rpm 1500r/min;

1.3 Cooling mode: Fan cooling; Environment temperature≦40℃;Install Height≦1000m;
 


2. Gearbox：Type D

2.1 New structure gearbox, high torque, high speed, material of gearbox is QT450;

2.2 The gear accuracy is grade 6(Chinese standard), which is a high precision. High speed heavyduty hard-tooth-surface. The materials are 20CrNi2MoA and 20CrMnMo,carburizing heat treatment of gears HRC60-62;

2.3 Involute gear teeth couplings between the output shafts and screw shafts;

2.4 Use imported brand bearings. Integrated thrust bearing assembly is Name Luoyang.

2.5 The bearings and gears are forced to adopt the immersion oil-lubrication system. Oil pump motor power 0.75kW;

2.6 Oil seal of the body: Taiwan Hansheng brand;

2.7 Tubular condenser, cooling area of 2.6 square meters;
 


3. Screw Elements：

3.1 Kneading blocks are made by CNC machining center, same size for different batches, with good interchangeability and self-cleaning quality;

3.2 Involute gear teeth connection to ensure power flow between the screw shaft and screw elements;

3.3 Screw element diameter:71mm; L/D=52; numbers of barrels:13

3.4 Screw rotating speed: 600r/min.

3.5 Material of screw element: W6Mo5Cr4V2, Hardness: HRC60-62.
 


4. Barrel：

4.1 The barrels are made by CNC machining center,the aligning pin and inner hole are completed by machining center in one time. Inner hole is grade 6, which is a high precision. After assembly, the concentricity error is 0.05mm, thus greatly enhance the self-cleaning of screw and reduce energy consumption;

4.2 The barrels are equipped with stainless steel integral shielding which are secure, good-looking and power saving;

4.3 The barrels is bimetal integral alloy sleevet：HRC60-62;

4.4 The 2nd and 3rd barrels adopt cast-copper heaters and the rest are cast-aluminum heaters. All barrels use the soft water cooling.

4.5 The first (1) barrel is feed barrel, the sixth(6) & ninth(9) are nature exhaust, the twelfth(12) has a vacuum exhaust mouth and the thirteenth(13) is extrusion barrel.
 

 

5. Barrel Temperature Control System：

5.1 Heating and cooling is controlled by temperature control meter through the solid-state relay or solenoid valve, thus form a closed-loop system to control the barrel temperature. The temperature control accuracy is ±2℃ ;water flow control : by use of stop valve;

5.2 Two cooling water pipes. All the cooling pipes, joints stainless steel; Soft water circulation system including heat exchangers, 1.1kw water pump, water tank body: stainless steel

 

6. Vacuum System:

6.1 External stainless steel vacuum condensation pot;

6.2 Water ring vacuum pump, motor power 2.2kw;


7. Hydraulic Screen Exchanger:

7.1 Piston type hydraulic screen exchanger, single column with two positions, incl. hydraulic station.

7.2 Cooling seal water channel within the shell, equipped with cast-copper heaters.
 

 


  Auxiliary system

1. Extrusion Head：

1.1 Alloy steel head body;

1.2 Nitride steel concentric plate 135 holes, diameter 2.8mm;

1.3 Cutter:2~6;

2. Water Ring Cover：

2.1 Stainless steel drum water ring cover;

2.2 Stainless steel joint basin;


3. Hot-Cut Palletizing System:

3.1 water ring pelletizer, motor power: 3kw;

3.2 Pelletizer car with guide rail;

3.3 with NIDEC frequency inverter;


 

4. Dewatered Equipment：

4.1 Vertical centrifugal dewater 7.5kW;

4.2 With little cyclone;

4.3 Stainless rotor and stator，stainless body;


5. Fan Convey Cooling System：

5.1 High pressure conveying fan, power 4kW;

5.2 Stainless steel cyclone separator, Ф800mm,incl. Carbon steel supporting;

5.3 Stainless steel pipes, T-Cock, cyclone, bend;
 

 


  Electrical Instruments Control System

 

1.Control instruments adopt the following brands:

1.1 Temperature control meter: omron;

1.2 Main extruder Frequency Inverter: YASKAWA;

1.3 Feeder frequency inverter: YASKAWA;

1.4 Main control switch: LG;

1.5 Low-voltage electric elements: Schneider;

1.6 Cooling electromagnetic valve: CEME;

1.7 AC contactor: Schneider;

2. General interlock and alarming:

2.1 The interlock protect of oil pump and main extruder;

2.2 Over-electric current, over-pressure alarming, emergency stop protection;

2.3 Main extruder fault alarming, emergency stop protection;

3. General illuminated button indicate switches:

3.1 Emergency stop switches;

3.2 Alarming reset;

3.3 Main motor start;

3.4 Main motor stop;

3.5 feeder start;

3.6 feeder stop;

3.7 Oil pump start;

3.8 Oil pump stop;

3.9 Water pump start;

3.10 Water pump stop;

3.11 Vacuum pump start;

3.11 Vacuum pump stop;

4. LED Indicator:

4.1 Power LED;

4.2 Main extruder fault LED indicator;

4.3 Main extruder over-electric current LED indicator;

4.4 Main extruder over-pressure LED indicator.

5. Digital display and controller:

5.1 Temperature control of all sections;

5.2 Temperature control of extruder head;

5.3 Main motor electric current;

5.4 Rotating speed of main extruder and feeder;

5.5 Melt temperature;

5.6 Melt pressure.

The Above Configuration Power Voltage Only Confine To Standard Power Supply 380v 50hz.

Other applications

Image name
Image name

+

KY-60 Co-Rotating Parallel Twin Screw Extruder Machine Group （L/D=44）

Image name
Image name

+

HKY-75 Water Ring Masterbatch Making Line （L/D=40）

Image name
Image name

+

HKY-65 Co-Rotating Parallel Twin Screw Extruder Machine Group （L/D=44）

MORE
%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home