Electronic Control System
Inquiry
Introduction

▪ Frame structure control cabinet,
▪ lmported electrical elements.
▪ Impored temperature control system,
▪ lmported driving system.
▪ Interiock and multi-protection
▪ Adopting imported PLC (OMRON or SlMESito achieve optimized process control.Stronger function,steady performance and much higher accuracy
▪ It can be also accomplished full-set link-lock protection, trouble safequard fault alarm cluing and so on
▪ Operation interface on touching screen is visual and marked, which is brief and easy to use
Technical Parameters
PLC Electrical Instrumentation Control System
1. The control system uses the following brands:
1.1 The main unit control adopts a Huichuan PLC programmable controller to realize the coordinated operation of the main unit, display and monitoring of operating process parameters, and alarm interlocking.
1.2 The electrical control cabinet includes: temperature control system; drive system; interlocking and control system;
1.3 PLC main unit: Huichuan H2U;
1.4 PLC panel: Huichuan IT5104E 10.4-inch color touch screen;
1.5 Temperature control module: The operating temperature of each zone of the main unit cylinder is regulated by dual-channel PID, which can realize intelligent PID parameter self-tuning, and the temperature fluctuation value is ≤±2℃;
1.6 Main unit speed controller: Huichuan;
1.7 Main control switch: LG; 1.8 Low-voltage electrical components: Schneider Electric;
1.9 Cooling solenoid valve: CEME;
1.10 AC contactor: Schneider Electric;
2. General interlocks and alarms:
2.1 Nylon pin over-torque protection;
2.2 Interlock protection between oil pump and main unit;
2.3 Overcurrent and overpressure alarms, shutdown protection;
2.4 Main unit fault alarm, shutdown protection;
3. General illuminated push-button indicators:
3.1 Emergency stop switch;
3.2 Alarm reset;
4. Indicator lights:
4.1 Power indicator light;
4.2 Main unit fault indicator light;
4.3 Main unit overcurrent indicator light;
4.4 Main unit overpressure indicator light;

5. PLC Touch Screen Display and Settings:
5.1 Temperature Control for Each Zone;
5.2 Head Temperature Control;
5.3 Main Motor Current;
5.4 Main Machine Speed;
5.5 Melting Temperature;
5.6 Melting Pressure;
The Above Configuration Power Voltage Only Confine To Standard Power Supply 220V and 380V 50Hz
Conventional Electrical Instrumentation Control System
1. The control instruments used are from the following brands:
1.1 Temperature controller: Omron;
1.2 Main extruder frequency converter: Huichuan;
1.3 Feeder frequency converter: Huichuan;
1.4 Main control switch: LG;
1.5 Low-voltage electrical components: Schneider Electric;

1.6 Cooling solenoid valve: VMI;
1.7 AC contactor: Schneider Electric;
2. General Interlocks and Alarms:
2.1 Oil pump and main extruder interlock protection;
2.2 Overcurrent and overpressure alarms, emergency stop protection;
2.3 Main extruder fault alarm, emergency stop protection;
3. General Illuminated Pushbutton Switches:
3.1 Emergency stop switch;
3.2 Alarm reset;
3.3 Main motor start;
3.4 Main motor stop;
3.5 Feeder start;

3.6 Feeder stops;
3.7 Oil pump starts;
3.8 Oil pump stops;
3.9 Water pump starts;
3.10 Water pump stops;
3.11 Vacuum pump starts;
3.11 Vacuum pump stops;
4. LED indicator lights:

4.1 Power LED indicator;
4.2 Main extruder fault LED indicator;
4.3 Main extruder overcurrent LED indicator;
4.4 Main extruder overpressure LED indicator.
5. Digital display and controller:
5.1 Temperature control for each section;
5.2 Extruder head temperature control;
5.3 Main motor current;
5.4 Main extruder and feeder speed;
5.5 Melt temperature;
5.6 Melt pressure.
The Above Configuration Power Voltage Only Confine To Standard Power Supply 380V 50HZ .
+86-25-84439591
Address: No. 19 Yunlong Road, Tao Wu Industrial Park, Jiangning District, Nanjing City
Mobile phone: 13801580926 / 13770651639
Email: admin@chinakaiyou.com
Copyright © 2025 Nanjing Kaiyou Rubber & Plastic Machinery Co., Ltd.